Samsung HMX-H205BP how to upgrade guide
This is the H200 model firmware upgrade method by SD card. Please, follow below sequence correctely.
.1. Prepare one SD card and firmware files( h200_firmware.bin, h200_micom.bin, autoadjust.dat ).
The upgrade operation doesn't start if the file name is different.
Please, check the file name is same with above.
2. Copy those 3 files to the root of SD card.
Just copy the files to SD card. Don't make a folder and copy into it.
3. Insert the prepared SD card into the H200 when the set is turned on.
Sometimes the upgrade sequence doesn't start if the set is turned on after SD card inserting.
4. Select 'YES' on the upgrade message.
The upgrade message is displayed on the LCD automatically.
If you couldn't see the upgrade message, please follow the method 2, 3 again.
5. If the upgrade is progressing, put the H200 somewhere for a minute until the set is turned off.
The set is turned off automatically after the upgrade is accomplished. Just wait a moment.
6. After the upgrade is finished, please turn ON the camcorder.
If you turn ON the camcorder, the adjustment will be progressing automatically.
7. After the adjustment is finished, please turn OFF and ON the camcorder.
Now see the camcorder how is works now after upgrade is finished
Drink at least 2L of water per day for a healthy living.